name
name
name
name
name
name
name
name

IRIS IVDX TECHNICAL SPECIFICATIONS

System Configuration

  • IRIS-IVDX Max-7520 Ports


Cabinet Dimensions (WxDxH)

  • 128 Ports : 482mmx400mmx177mm
  • 256 Ports : 482mmx400mmx266mm
  • 512 Ports : 600rnmx500mmx600mm
  • 1024 Ports : 600mmx600mmxl000mm
  • 1504 Ports : 600mmx600mmxl400mm


Expansion Cabinet (WxDxH)

  • Medium : 600mmx600mmx1000mm
  • Large : 600mmx500mmxl400mm

Switching Technology

  • Digital PCM/TDM
  • Fully Non-blocking

Wireless Standards

  • DECT/GAP, ETS1

Extension Equipment

  • Single Line Telephone (SLT) Proprietor)7 Digital Telephones
  • Digital Telephones with Graphical Display

Backbone Support

  • ATM
  • IP (SIP/H.323)

Traffic Handling

  • BHCA : 250,000
  • BHCC : 100,000

Loop Resistance

  • Normal Loop Extn. 1200 Ohms
  • Long Loop Extn. 3000 Ohms

CTI Support

  • TAPI/TSAPI/CSTA compliant

In-skin Data Interfaces (xDSL)

  • Asymmetric Digital Subscriber
  • Line (ADSL)
  • Symmetric High Bit Rate Digital
  • Subscriber Line (SHDSL)
  • Very High Speed Digital
  • Subscriber Line (VDSL)

Conferencing

  • Upto 64 Party Audio
  • Conferencing
  • Video Conferencing supported
  • upto 768K & on IP (H.320)

Ringer Voltage

  • 75 V AC, 20 Hz. (Programmable)

Storage Media

  • Flash ROM 32 MB (min)
  • HDD/SOD 32 MB (min)

Loop Resistance

  • Normal Loop Extn. 1200 Ohms
  • Long Loop Extn. 3000 Ohms

Peripheral Support

  • Call Detail Recording (A S M D R)
  • Voice Mail (First and third Party)
  • PC based Operator Console
  • Large Display Operator Consoles

CLI Feature

  • Available on both Digital & Analogue terminals, supported in both DTMF & FSK format. CLI on Analogue CO (P&T) trunks transmitted to Analogue extensions, with name display ADSI-II compliant CIDCW support

Operating Voltage

  • -48 V DC ±10%

Power Consumption

  • 5 Amps per shelf at-48 V DC (Full Load)

Environmental Standards

  • Temperature: -5" C to 60" C
  • Humidity 20% - 90% RH (Non condensing)

Control

  • 32 Bit RISC Processor
  • Distributed Control Architecture


Interface / Networking

  • Analog CO Lines
  • Analog DID/DOD/BWT (LD)
  • Analog E&M (2W/4W)
  • Magneto/Ring Down
  • Digital ISDN BRI ('So' & 'U')
  • Digital ISDN PRI (30B+D)
  • Digital CEPT/E1/T1/J1
  • QS1G on BR1/PRI / IP & SHDSL
  • IP Gateways
  • STM 1/4/16

Protocols Supported

  • DTMF
  • Loop Dial
  • R2 MAC (Indian Modified)
  • R2 MFC (CCITT)
  • PLCC Signaling
  • QSIG
  • V5.2
  • SS7

With communication becoming such an indispensable business tool, the “Dx-2000” outlines the vision of simpler communication of tomorrow. From the traditional PBX of yesterday, to the information highways of the next millennium, the “Dx-2000” effectively provides technological bridges between various platforms to let you increase your capacity and functionality, thereby providing you a competitive edge. So, switch over to the communication power of the next millennium – Switch over to the “Dx-2000”.